|
|
Study of bearing noise regarding accuracy of machining
Studýnka, Pavel ; Sabo, Karol (referee) ; Klapka, Milan (advisor)
This bachalor thesis deals with connection between the quality of surface of raceways of a bearing and vibrations in operation. This thesis describes basic geometrical parameters of a bearing that have main influence on its resulting quality and vibrations. It presents methods to evaluate the quality of the raceways surfaces and their connection between them. As a part of the thesis is an experiment, which should prove, what is the connection between the measuring of quality of the surface of raceways and measuring the vibrations of bearings during the process, by the way used in the company KOYO Olomouc. The quality of raceways is evaluated on a measuring device MUK-F 300 and vibrations on IL 100R/2000.
|
|
|
Functional surfaces and surface texture
Novák, Jiří ; Brandejs, Jan (referee) ; Svoboda, Pavel (advisor)
The aim of this bachelor publication was an elaboration of professional recherche about geometric product specification (GPS). My publication contains the comparison of the foregone and current norms, which include parameters surface texture and notation surface texture, relation of surface texture and surface function, incoming development trends and needful supplements.
|
|
|
Design of apparatus for determination of directions of reinforcing fibres in soft biological tissues in their deformed state
Sodomka, Tomáš ; Vaverka, Jiří (referee) ; Burša, Jiří (advisor)
The Bachelor´s thesis is focused on the determination of directions of collagen fibres in elastic arteries. The first aim of this thesis is a general introduction into soft tissue mechanics with turning attention to connective tissue where collagen fibres are their inseparable part. Also the thesis introduces arrangement of collagen fibres, their waviness and how the waviness thwarts determination of direction of fibres. The second aim is a design and test of the mechanical apparatus, which is able to stretch a squared aortic sample in two perpendicular directions (independently on each other) up to the relative deformation of 30 %. Design of the apparatus allows the sample to be dipped into the formaldehyde solution, which fixes the deformation. Consequent histologic sections of the sample will be used for the determination of global directions of collagen fibres in the aorta. The apparatus is designed to simulate conditions in a human or animal body where aorta is axially pre-stretched and at the same time expanded in the radial direction by blood pressure.
|
|
| |
|
|
ANALYSES OF STRUCTURE OF COLLAGEN FIBRES IN ARTERIAL WALL USING MODERN METHODS OF LIGHT MICROSCOPY
Turčanová, Michaela ; Kochová, Petra (referee) ; Hampl, Aleš (referee) ; Burša, Jiří (advisor)
The doctoral thesis deals with the analysis of the arrangement of collagen fibres in arteries and their correct evaluation and use in structurally motivated constitutive models of the material. The first part of the work is focused on the literature search of mechanical properties of arteries and on an overview of available methods for the detection of waviness, orientation and dispersion of fibres. Most works identify fibre angles as additional parameter from mechanical tests and thus degrade the structural nature of the model. The second part describes an automatic algorithm that can evaluate the local directions of fibres and their scattering from images from a polarizing microscope and structurebased hyperelastic constitutive models. Furthermore, there is an emphasis on choosing the most appropriate imaging method based on fluorescence microscopy, which will help us to distinguish the waviness and scattering of fibres. In the next part of the thesis, two experiments on porcine arteries are presented in order to determine the influence of different magnitudes of biaxial deformation on fiber orientation and dispersion. The last part of the work presents the evaluated structural parameters for porcine and human aortas, which were analyzed not only under polarized light, but also under a laser scanning confocal microscope, thanks to which the waviness of the fibers and their global direction were obtained.
|
|
|
Kvalita řezné spáry při podélném rozmítání dřeva speciálními pilovými kotouči
Kryl, Jan
The thesis is focused on qualities problems of the cutting kerf rip saw-blade at along grain cutting native wood. The effect of vibrations of circular saw-blades and feed rate of shift of workpiece on the quality of the kerf has being investigated. The basic parameters of evaluation of the surface were mentioned in theoretical part of this thesis. Also, the methods of assessing the quality of the surface of scattered timber are analyzed inside this thesis. There is also described suitability of different measurement methods, which have been used, due to the nature of solid wood. Finally, constructional modifications of scattering discs are characterized here. At practical part of this thesis is compared the quality of surface of wood scattered with using of saw-blades from company of PILANA. Discs with standard profile of tooth and special toothing of shaped keg were used.
|
|
|
Design of apparatus for determination of directions of reinforcing fibres in soft biological tissues in their deformed state
Sodomka, Tomáš ; Vaverka, Jiří (referee) ; Burša, Jiří (advisor)
The Bachelor´s thesis is focused on the determination of directions of collagen fibres in elastic arteries. The first aim of this thesis is a general introduction into soft tissue mechanics with turning attention to connective tissue where collagen fibres are their inseparable part. Also the thesis introduces arrangement of collagen fibres, their waviness and how the waviness thwarts determination of direction of fibres. The second aim is a design and test of the mechanical apparatus, which is able to stretch a squared aortic sample in two perpendicular directions (independently on each other) up to the relative deformation of 30 %. Design of the apparatus allows the sample to be dipped into the formaldehyde solution, which fixes the deformation. Consequent histologic sections of the sample will be used for the determination of global directions of collagen fibres in the aorta. The apparatus is designed to simulate conditions in a human or animal body where aorta is axially pre-stretched and at the same time expanded in the radial direction by blood pressure.
|
|
|
Určování textury povrchu obráběné součásti
Hladký, Filip
The topic of the bachelor thesis is Determining the texture of the surface of the machined component I've dealt with the explanation of the basic concepts from the field of surface texture and detailed research of different methods of ma-chining. This is followed by a description of the methods for measurement of pa-rameter roughness Ra. In the practical part of the bachelor thesis are insights from the theoretical part are applied to the specific case of the measurement of the parameter of roughness for the three different components.
|
|
|
Kvalita řezné spáry při dělení umělého kamene
Jálová, Lenka
The work is focused on the characteristic, properties and uses of artificial stone (category Solid surface) in furniture manufacturing. Beside other things, work deals with the process of machining, circular saw blades, water jet machining and methods for evaluating the kerf quality. The main goal is to assess the kerf quality for both different technologies of cutting and different Solid surface materials. Finally, the work is focused on assessing the significance of the circular saw blades geometry and their impact on the quality of machined surface.
|
|
|
Study of bearing noise regarding accuracy of machining
Studýnka, Pavel ; Sabo, Karol (referee) ; Klapka, Milan (advisor)
This bachalor thesis deals with connection between the quality of surface of raceways of a bearing and vibrations in operation. This thesis describes basic geometrical parameters of a bearing that have main influence on its resulting quality and vibrations. It presents methods to evaluate the quality of the raceways surfaces and their connection between them. As a part of the thesis is an experiment, which should prove, what is the connection between the measuring of quality of the surface of raceways and measuring the vibrations of bearings during the process, by the way used in the company KOYO Olomouc. The quality of raceways is evaluated on a measuring device MUK-F 300 and vibrations on IL 100R/2000.
|
guest ::
